dmesg - ASUS NVIDIA GeForce GTX 660
microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.4-nenokryz (root@arakis1) (gcc version 5.3.1 20160307 (Debian 5.3.1-11) ) #1 SMP PREEMPT Tue Mar 8 11:48:40 CET 2016
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000c8039fff] usable
BIOS-e820: [mem 0x00000000c803a000-0x00000000c8040fff] ACPI NVS
BIOS-e820: [mem 0x00000000c8041000-0x00000000c848bfff] usable
BIOS-e820: [mem 0x00000000c848c000-0x00000000c88e1fff] reserved
BIOS-e820: [mem 0x00000000c88e2000-0x00000000dd736fff] usable
BIOS-e820: [mem 0x00000000dd737000-0x00000000dd93ffff] reserved
BIOS-e820: [mem 0x00000000dd940000-0x00000000dd958fff] ACPI data
BIOS-e820: [mem 0x00000000dd959000-0x00000000dde96fff] ACPI NVS
BIOS-e820: [mem 0x00000000dde97000-0x00000000deffefff] reserved
BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: ASUS All Series/Z87-C, BIOS 1802 01/28/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 0400000000 mask 7FF0000000 write-back
2 base 0410000000 mask 7FF8000000 write-back
3 base 0418000000 mask 7FFC000000 write-back
4 base 041C000000 mask 7FFE000000 write-back
5 base 041E000000 mask 7FFF000000 write-back
6 base 00E0000000 mask 7FE0000000 uncachable
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd850-0x000fd85f] mapped at [ffff8800000fd850]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01aeb000, 0x01aebfff] PGTABLE
BRK [0x01aec000, 0x01aecfff] PGTABLE
BRK [0x01aed000, 0x01aedfff] PGTABLE
BRK [0x01aee000, 0x01aeefff] PGTABLE
BRK [0x01aef000, 0x01aeffff] PGTABLE
BRK [0x01af0000, 0x01af0fff] PGTABLE
RAMDISK: [mem 0x363b4000-0x371d1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DD945080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000DD953838 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000DD945198 00E699 (v02 ALASKA A M I 00000031 INTL 20091112)
ACPI: FACS 0x00000000DDE95080 000040
ACPI: APIC 0x00000000DD953948 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000DD9539E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: LPIT 0x00000000DD953A28 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
ACPI: SSDT 0x00000000DD953A88 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
ACPI: SSDT 0x00000000DD953FC8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
ACPI: MCFG 0x00000000DD954AA0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 0x00000000DD954AE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 0x00000000DD954B18 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 0x00000000DD954E88 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
ACPI: BGRT 0x00000000DD9583C8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041effffff]
NODE_DATA(0) allocated [mem 0x41eff8000-0x41effbfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000041effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x00000000c8039fff]
node 0: [mem 0x00000000c8041000-0x00000000c848bfff]
node 0: [mem 0x00000000c88e2000-0x00000000dd736fff]
node 0: [mem 0x00000000defff000-0x00000000deffffff]
node 0: [mem 0x0000000100000000-0x000000041effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
On node 0 totalpages: 4178551
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 14092 pages used for memmap
DMA32 zone: 901851 pages, LIFO batch:31
Normal zone: 51136 pages used for memmap
Normal zone: 3272704 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xc803a000-0xc8040fff]
PM: Registered nosave memory: [mem 0xc848c000-0xc88e1fff]
PM: Registered nosave memory: [mem 0xdd737000-0xdd93ffff]
PM: Registered nosave memory: [mem 0xdd940000-0xdd958fff]
PM: Registered nosave memory: [mem 0xdd959000-0xdde96fff]
PM: Registered nosave memory: [mem 0xdde97000-0xdeffefff]
PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88041ec00000 s87640 r8192 d31144 u262144
pcpu-alloc: s87640 r8192 d31144 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4113238
Policy zone: Normal
log_buf_len individual max cpu contribution: 131072 bytes
log_buf_len total cpu_extra contributions: 917504 bytes
log_buf_len min size: 131072 bytes
log_buf_len: 1048576 bytes
early log buf free: 119832(91%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
Memory: 16357964K/16714204K available (5431K kernel code, 1055K rwdata, 1832K rodata, 1124K init, 772K bss, 356240K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
Console: colour VGA+ 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3498.090 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6996.18 BogoMIPS (lpj=3498090)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 5 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff81a22000 - ffffffff81a28000)
ftrace: allocating 22010 entries in 86 pages
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4771 CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
microcode: CPU2 microcode updated early to revision 0x1e, date = 2015-08-13
#3
microcode: CPU3 microcode updated early to revision 0x1e, date = 2015-08-13
#4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (55969.44 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xc803a000-0xc8040fff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0xdd959000-0xdde96fff] (5496832 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040C100400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040C0FA000 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88040E09EE00 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf721a000-0xf721a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf7218000-0xf72183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf7216000-0xf72167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf7215000-0xf72150ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
pci 0000:01:00.0: [10de:11c0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
pci 0000:03:00.0: reg 0x18: [mem 0xf7100000-0xf7100fff 64bit]
pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:00:1c.3: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0xc803a000-0xcbffffff]
e820: reserve RAM buffer [mem 0xc848c000-0xcbffffff]
e820: reserve RAM buffer [mem 0xdd737000-0xdfffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1c00-0x1cfe] has been reserved
system 00:01: [io 0x1d00-0x1dfe] has been reserved
system 00:01: [io 0x1e00-0x1efe] has been reserved
system 00:01: [io 0x1f00-0x1ffe] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:04: [io 0x0290-0x029f] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.2: bridge window [mem 0xf7100000-0xf71fffff]
pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:00:1c.3: PCI bridge to [bus 04-05]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:04: resource 13 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
pci_bus 0000:05: resource 13 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 14456K (ffff8800363b4000 - ffff8800371d2000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd9737000-0xdd737000] (64MB) mapped at [ffff8800d9737000-ffff8800dd736fff]
RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-14 Joules
hw unit of domain pp1-gpu 2^-14 Joules
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1457642913.302:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x42120
intel_idle: v0.4 model 0x3C
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU4 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU5 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU6 sig=0x306c3, pf=0x2, revision=0x1e
microcode: CPU7 sig=0x306c3, pf=0x2, revision=0x1e
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
rtc_cmos 00:02: setting system clock to 2016-03-10 20:48:34 UTC (1457642914)
Freeing unused kernel memory: 1124K (ffffffff81909000 - ffffffff81a22000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 700K (ffff880001551000 - ffff880001600000)
Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
random: systemd-udevd urandom read with 2 bits of entropy available
wmi: Mapper loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
r8168 Gigabit Ethernet driver 8.041.01-NAPI loaded
[drm] Initialized drm 1.1.0 20060810
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
SCSI subsystem initialized
libata version 3.00 loaded.
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7218000
nouveau 0000:01:00.0: NVIDIA GK106 (0e6000a1)
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.4-nenokryz ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
r8168 Copyright (C) 2015 Realtek NIC software team
This program comes with ABSOLUTELY NO WARRANTY; for details, please see .
This is free software, and you are welcome to redistribute it under certain conditions; see .
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7217000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.4-nenokryz ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.4-nenokryz xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 14 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.4.4-nenokryz xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216200 irq 28
ata4: SATA max UDMA/133 abar m2048@0xf7216000 port 0xf7216280 irq 28
ata5: DUMMY
ata6: DUMMY
nouveau 0000:01:00.0: bios: version 80.06.58.00.09
nouveau 0000:01:00.0: fb: 2048 MiB GDDR5
[TTM] Zone kernel: Available graphics memory: 8187242 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
nouveau 0000:01:00.0: DRM: VRAM: 2048 MiB
nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
nouveau 0000:01:00.0: DRM: TMDS table version 2.0
nouveau 0000:01:00.0: DRM: DCB version 4.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 02000f00 00000000
nouveau 0000:01:00.0: DRM: DCB outp 01: 01000f02 00020030
nouveau 0000:01:00.0: DRM: DCB outp 03: 02011f62 00020010
nouveau 0000:01:00.0: DRM: DCB outp 04: 04822fb6 0f420010
nouveau 0000:01:00.0: DRM: DCB outp 05: 04022f72 00020010
nouveau 0000:01:00.0: DRM: DCB outp 06: 08033f82 00020030
nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
nouveau 0000:01:00.0: DRM: DCB conn 01: 00010161
nouveau 0000:01:00.0: DRM: DCB conn 02: 00020246
nouveau 0000:01:00.0: DRM: DCB conn 03: 01000331
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 4-5: LPM exit latency is zeroed, disabling LPM.
usb 4-5: New USB device found, idVendor=1058, idProduct=1130
usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-5: Product: My Book 1130
usb 4-5: Manufacturer: Western Digital
usb 4-5: SerialNumber: 574341575A30323435343434
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: supports DRM functions and may not be fully accessible
usb-storage 4-5:1.0: USB Mass Storage device detected
ata3.00: ATA-9: ST1000DM003-1CH162, CC49, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
scsi host6: usb-storage 4-5:1.0
usbcore: registered new interface driver usb-storage
ata3.00: configured for UDMA/133
ata4.00: ATAPI: HL-DT-ST BD-RE GGW-H20L, YL07, max UDMA/133
ata2.00: ATA-9: Crucial_CT512MX100SSD1, MU02, max UDMA/133
ata2.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: supports DRM functions and may not be fully accessible
ata4.00: configured for UDMA/133
ata2.00: configured for UDMA/133
ata1.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA Crucial_CT512MX1 MU02 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA ST1000DM003-1CH1 CC49 PQ: 0 ANSI: 5
usb 3-14: new high-speed USB device number 2 using xhci_hcd
usb 1-1: New USB device found, idVendor=8087, idProduct=8008
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8000
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 4-6: new SuperSpeed USB device number 3 using xhci_hcd
usb 4-6: LPM exit latency is zeroed, disabling LPM.
usb 4-6: New USB device found, idVendor=1058, idProduct=1130
usb 4-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-6: Product: My Book 1130
usb 4-6: Manufacturer: Western Digital
usb 4-6: SerialNumber: 574341575A30323635363032
usb-storage 4-6:1.0: USB Mass Storage device detected
scsi host7: usb-storage 4-6:1.0
scsi 3:0:0:0: CD-ROM HL-DT-ST BD-RE GGW-H20L YL07 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: Enabling discard_zeroes_data
sdb: sdb1 sdb2 sdb3 sdb4
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: [sdc] Attached SCSI disk
nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo ffff880409607c00
fbcon: nouveaufb (fb0) is primary device
usb 3-14: New USB device found, idVendor=1a40, idProduct=0201
usb 3-14: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-14: Product: USB 2.0 Hub [MTT]
hub 3-14:1.0: USB hub found
hub 3-14:1.0: 7 ports detected
tsc: Refined TSC clocksource calibration: 3497.969 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd278305, max_idle_ns: 440795207708 ns
sr 3:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
usb 3-14.1: new high-speed USB device number 3 using xhci_hcd
usb 3-14.1: New USB device found, idVendor=2040, idProduct=c000
usb 3-14.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-14.1: Product: WinTV MiniStick
usb 3-14.1: Manufacturer: Hauppauge Computer Works
usb 3-14.1: SerialNumber: 4033982786
usb 3-14.2: new full-speed USB device number 4 using xhci_hcd
usb 3-14.2: New USB device found, idVendor=0a5c, idProduct=2121
usb 3-14.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14.2: Product: Bluetooth Dongle V2.0+EDR
usb 3-14.2: Manufacturer: Broadcom Corp
Console: switching to colour frame buffer device 240x67
nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
usb 3-14.3: new high-speed USB device number 5 using xhci_hcd
usb 3-14.3: New USB device found, idVendor=1a40, idProduct=0101
usb 3-14.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-14.3: Product: USB 2.0 Hub [MTT]
hub 3-14.3:1.0: USB hub found
hub 3-14.3:1.0: 4 ports detected
usb 3-14.4: new full-speed USB device number 6 using xhci_hcd
usb 3-14.4: New USB device found, idVendor=046d, idProduct=c52b
usb 3-14.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14.4: Product: USB Receiver
usb 3-14.4: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-14.4/input2
scsi 6:0:0:0: Direct-Access WD My Book 1130 1016 PQ: 0 ANSI: 6
scsi 6:0:0:1: Enclosure WD SES Device 1016 PQ: 0 ANSI: 6
sd 6:0:0:0: [sdd] 732558336 4096-byte logical blocks: (3.00 TB/2.73 TiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 47 00 10 08
sd 6:0:0:0: [sdd] No Caching mode page found
sd 6:0:0:0: [sdd] Assuming drive cache: write through
sd 6:0:0:0: [sdd] 732558336 4096-byte logical blocks: (3.00 TB/2.73 TiB)
usb 3-14.6: new high-speed USB device number 7 using xhci_hcd
random: nonblocking pool is initialized
sdd: sdd1
sd 6:0:0:0: [sdd] 732558336 4096-byte logical blocks: (3.00 TB/2.73 TiB)
sd 6:0:0:0: [sdd] Attached SCSI disk
input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.4/3-14.4:1.2/0003:046D:C52B.0003/0003:046D:400A.0004/input/input5
logitech-hidpp-device 0003:046D:400A.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-14.4:1
usb 3-14.6: New USB device found, idVendor=041e, idProduct=4088
usb 3-14.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-14.6: Product: VF0700 Live! Cam Chat HD
usb 3-14.6: Manufacturer: Creative Technology Ltd.
usb 3-14.6: SerialNumber: -1@001544
scsi 7:0:0:0: Direct-Access WD My Book 1130 1016 PQ: 0 ANSI: 6
scsi 7:0:0:1: Enclosure WD SES Device 1016 PQ: 0 ANSI: 6
sd 7:0:0:0: [sde] 732558336 4096-byte logical blocks: (3.00 TB/2.73 TiB)
sd 7:0:0:0: [sde] Write Protect is off
sd 7:0:0:0: [sde] Mode Sense: 47 00 10 08
sd 7:0:0:0: [sde] No Caching mode page found
sd 7:0:0:0: [sde] Assuming drive cache: write through
sd 7:0:0:0: [sde] 732558336 4096-byte logical blocks: (3.00 TB/2.73 TiB)
sde: sde1
sd 7:0:0:0: [sde] 732558336 4096-byte logical blocks: (3.00 TB/2.73 TiB)
sd 7:0:0:0: [sde] Attached SCSI disk
usb 3-14.3.1: new full-speed USB device number 8 using xhci_hcd
clocksource: Switched to clocksource tsc
usb 3-14.3.1: New USB device found, idVendor=046d, idProduct=c534
usb 3-14.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14.3.1: Product: USB Receiver
usb 3-14.3.1: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.3/3-14.3.1/3-14.3.1:1.0/0003:046D:C534.0005/input/input6
hid-generic 0003:046D:C534.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-14.3.1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.3/3-14.3.1/3-14.3.1:1.1/0003:046D:C534.0006/input/input7
usb 3-14.3.4: new high-speed USB device number 9 using xhci_hcd
hid-generic 0003:046D:C534.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-14.3.1/input1
usb 3-14.3.4: New USB device found, idVendor=2304, idProduct=0223
usb 3-14.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-14.3.4: Product: Pinnacle High Speed USB Device
usb 3-14.3.4: Manufacturer: Pinnacle Systems, Inc.
raid6: sse2x1 gen() 12109 MB/s
raid6: sse2x1 xor() 9371 MB/s
raid6: sse2x2 gen() 15828 MB/s
raid6: sse2x2 xor() 10589 MB/s
raid6: sse2x4 gen() 18171 MB/s
raid6: sse2x4 xor() 12738 MB/s
raid6: avx2x1 gen() 24234 MB/s
raid6: avx2x2 gen() 28234 MB/s
raid6: avx2x4 gen() 32351 MB/s
raid6: using algorithm avx2x4 gen() 32351 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 38176.000 MB/sec
Btrfs loaded
PM: Starting manual resume from disk
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd-sysv-generator[281]: Overwriting existing symlink /run/systemd/generator.late/console-setup.service with real service.
systemd-sysv-generator[281]: Overwriting existing symlink /run/systemd/generator.late/keyboard-setup.service with real service.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Created slice system-getty.slice.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Debug File System.
Key type encrypted registered
loop: module loaded
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started Journal Service.
EXT4-fs (sda3): re-mounted. Opts: discard,errors=remount-ro
systemd-journald[286]: Received request to flush runtime journal from PID 1
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sr 3:0:0:0: Attached scsi generic sg3 type 5
sd 6:0:0:0: Attached scsi generic sg4 type 0
scsi 6:0:0:1: Attached scsi generic sg5 type 13
sd 7:0:0:0: Attached scsi generic sg6 type 0
scsi 7:0:0:1: Attached scsi generic sg7 type 13
ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
audit: type=1400 audit(1457639318.197:2): apparmor="STATUS" operation="profile_load" name="/usr/bin/freshclam" pid=608 comm="apparmor_parser"
Adding 16777212k swap on /dev/sdb3. Priority:-1 extents:1 across:16777212k SSFS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain dram
audit: type=1400 audit(1457639318.219:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=608 comm="apparmor_parser"
audit: type=1400 audit(1457639318.219:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=608 comm="apparmor_parser"
audit: type=1400 audit(1457639318.219:5): apparmor="STATUS" operation="profile_load" name="pxgsettings" pid=608 comm="apparmor_parser"
audit: type=1400 audit(1457639318.219:6): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=608 comm="apparmor_parser"
audit: type=1400 audit(1457639318.219:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-ofono" pid=608 comm="apparmor_parser"
iTCO_vendor_support: vendor-support=0
audit: type=1400 audit(1457639318.232:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/clamd" pid=608 comm="apparmor_parser"
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
media: Linux media interface: v0.10
audit: type=1400 audit(1457639318.238:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cups-browsed" pid=608 comm="apparmor_parser"
Linux video capture interface: v2.00
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
audit: type=1400 audit(1457639318.259:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=608 comm="apparmor_parser"
eth0: 0xffffc900018b8000, 74:d0:2b:9e:33:4d, IRQ 25
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
vboxdrv: Found 8 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3497959355 Hz
vboxdrv: Successfully loaded version 5.0.16 (interface 0x00240000)
usbcore: registered new interface driver btusb
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
usb 3-14.6: Warning! Unlikely big volume range (=5632), cval->res is probably wrong.
usb 3-14.6: [2] FU [Mic Capture Volume] ch = 1, val = -5632/0/1
usbcore: registered new interface driver snd-usb-audio
uvcvideo: Found UVC 1.00 device VF0700 Live! Cam Chat HD (041e:4088)
input: VF0700 Live! Cam Chat HD as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.6/3-14.6:1.0/input/input20
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
vboxpci: IOMMU not found (not registered)
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
smsusb:smsusb_probe: board id=8, interface number 0
Registered IR keymap rc-hauppauge
input: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/rc/rc0/input21
rc0: SMS IR (Hauppauge WinTV MiniStick) as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14.1/rc/rc0
IR RC6 protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR SANYO protocol handler initialized
smsusb:smsusb_probe: Device initialized with return code 0
IR XMP protocol handler initialized
input: MCE IR Keyboard/Mouse (smsmdtv) as /devices/virtual/input/input22
IR MCE Keyboard/mouse protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 248
rc rc0: lirc_dev: driver ir-lirc-codec (smsmdtv) registered at minor = 0
IR LIRC bridge handler initialized
DVB: registering new adapter (Hauppauge WinTV MiniStick)
usb 3-14.1: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)...
smsdvb:smsdvb_hotplug: DVB interface registered.
usbcore: registered new interface driver smsusb
r8168: eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
fuse init (API version 7.23)
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
nouveau 0000:01:00.0: Direct firmware load for nouveau/nve6_fuc084 failed with error -2
nouveau 0000:01:00.0: Direct firmware load for nouveau/nve6_fuc084d failed with error -2
nouveau 0000:01:00.0: msvld: unable to load firmware data
nouveau 0000:01:00.0: msvld: init failed, -19
EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)